Cable

Original HP Ribbon cable - 100-pin (M) connector to 100-pin (F) connector - 4cm (1.6in) long

Original HP Single-ended SCSI cable internal ribbon cable with three 50 pin (F) connectors and a terminator at one end, 0.5m (1.5ft) long

Original HP Fast wide SCSI internal ribbon cable - Has three high density 68 pin (M) connectors, a terminator, and a ferrite, 0.3m (1.0ft) long

Original HP SCSI-2 cable - Has a 50-pin (F) internal connector and a high density 50-pin (F) external connector - 20cm (8.0in) long

Original HP SCSI-3 cable - Has a 68-pin (M) internal connector and a high density 68-pin (F) external connector - 20cm (8.0in) long

Original HP Drive power cable - Has three 4-pin (F) connectors - 34cm (13.4in) long

Original HP LED cable assembly - Includes a 5 pin (F) connector with an attached transistor and mounting hardware, 18cm (7.1in) long

Original HP CD-ROM cable

Original HP Ultra Wide/Single-Ended SCSI ribbon cable with termination - Has a 68-pin (F) connector on one end and three 68-pin (M) connectors for the drives - 63.8cm (25.1in) long

Original HP Single-Ended SCSI-2 ribbon cable - Three 50-pin (F) internal connectors and a high density 50-pin (F) connector with latch clips for the rear panel - 75cm (29.5in) long

Original HP Wide Differential SCSI ribbon cable with a ferrite - Has three 68-pin (M) internal connectors and a 68-pin (F) connector for the rear panel - 94cm (37in) long

Original HP Floppy ribbon cable - 26-pin (M) connector marked `This end to floppy` to 26-pin (M) connector - 35.3cm (13.9in) long

Original HP SCSI ribbon cable with termination - 50-pin (F) connector marked `Single-Ended SCSI disk interface board` and 50-pin (F) connector marked `Single-Ended SCSI device` - 30.5cm (12in) long

Original HP Fast Wide SCSI ribbon cable with ferrite and termination - Has four 68-pin (M) connectors - 64.8cm (25.5in) long

Original HP Floppy drive ribbon cable - 34-pin (F) connector marked `Disk interface board` to 34-pin (F) connector marked `Floppy drive` - 38.7cm (15.3in) long