Cable

Original HP SCSI interface cable with thumbscrews on both ends - 50-pin high density (M) to 68-pin high density (M) - 1.5m (4.9ft) long

Original HP SCSI interface cable with thumbscrews on both ends - 50-pin high density (M) to 68-pin high density (M) - 2.0m (6.6ft) long

Original HP SCSI interface cable with thumbscrews on both ends - 50-pin high density (M) to 68-pin high density (M) - 5.0m (16ft) long

Original HP Ribbon Cable - Data cable for the DDS-3 tape (or floppy) drive and the CD-ROM drive

Original HP Drive power cable assembly - Connects from the I/O and PCI backplane PC board assembly to the SCA hard drive interface board, floppy/tape drive bay, and the CD-ROM bay

Original HP Ribbon Cable - Connects between the system processor board and the front panel (For the LCD display and power switch assembly)

Original HP Flex cable assembly (U-shaped)

Original HP IDE CD-ROM drive ribbon cable with ferrite - 40-pin (F) connector marked `to PCA` to a 40-pin (F) connector marked `to CD-ROM` - 34cm (13.4in) long

Original HP Ultra SCSI/Low Voltage Differential (LVD) SCSI cable - Has one 68-pin (M) connector on each end - 0.6m (2ft) long

Original HP Floppy drive ribbon cable with ferrite - 34-pin (F) connector marked `to PCA` to 34-pin (F) connector marked `to floppy` - 43.2cm (17in) long

Original HP Drive power cable - Two 4-pin (F) connectors with four wires and a 4-pin (F) connector with two wires - 85cm (33.5in) long

Original HP Ribbon cable - DB-25 (M) connector to 20-pin (F) connector - 46cm (18in) long

Original HP Backplane to backplane flex cable - 12.7cm (5in) long - Includes attaching hardware

Original HP Backplane to backplane flex cable - 20.3cm (8in) long - Includes attaching hardware

Original HP I/O LED assembly cable