Cable

Original HP Flex circuit assembly

Original HP I/O panel assembly - Includes SCSI cable to the SCSI array controller board

Original HP Power and status LED cable assembly

Original HP Address switches and cable (harness) assembly for five drives

Original HP Power/LED cable assembly - Includes front panel LEDs

Original HP Cable assembly

Original HP Ribbon cable - 20-pin (F) connector to 20-pin (F) connector - 23.2cm (9.1in) long

Original HP Flex cable - 6.9cm (2.7in) long

Original HP Motor harness cable with ferrite - 15-pin (F) connector to 29.5cm (11.6in) cable with 6-pin (F) connector, 33.8cm (13.3in) cable with 3-pin (F) connector, and 40.6cm (16in) cable with 6-pin (F) connector

Original HP Carriage assembly flex cable assembly - Cable is attached to a large plastic cable clamp - Cable length is 71cm (28in)

Original HP Motor harness cable assembly - 15-pin (F) connector to a 27.4cm (10.8in) cable with a 6-pin (F) connector, a 34cm (13.4in) cable with a 2-pin (F) connector, and a 40.6cm (16in) cable with a 6-pin (F) connector

Original HP Motor harness cable assembly - 15-pin (F) connector to a 27.4cm (10.8in) cable with a 6-pin (F) connector, a 34cm (13.4in) cable with a 2-pin (F) connector, and a 40.6cm (16in) cable with a 6-pin (F) connector

Original HP Cable harness bundle A - Has many connectors: 30-pin (F) marked 'J14', 30-pin (F) marked 'J23', 2-pin (F), six 3-pin (F), 5-pin (F), 6-pin (F), and two 11-pin (F) - Overall length is 103cm (40.8 inches)

Original HP Cable harness bundle B with ferrites - Has many conectors: two 30-pin (F), two 2-pin (F), four 3-pin (F), 9-pin (F), two 10-pin (F), 12-pin (F) - Overall length is 102cm (40in)

Original HP Power supply cable harness